User's Manual

Applying Power to the Savi Fixed Reader
Savi Fixed Reader SR-650-101 Installation Guide 25
Applying Power to the Savi Fixed
Reader
After connecting power and network cables, apply power to the reader by
connecting the male connector end of the power cable to the appropriate
power source, such as the Savi Solar Power Module or an AC outlet.
Figure 2-9 Savi Fixed Reader SR-650-101 LED display panel
To confirm that power is present in the reader:
1. Observe the indicators on the LED display panel. The power indicator
should be illuminated whenever power is present.
a. During the initial power-on sequence, the Savi fixed reader
concurrently displays a dot and a dash.
b. After this initial display, the reader identification number (ID)
appears in the LED display as a sequence of five digits.
Savi fixed reader ID number 01234 displays: 0, then 1, then 2, then 3,
and then 4 in sequence during the initialization process.
LED display
panel