User's Manual

Connecting Power Cables to the Savi Fixed Reader
Savi Fixed Reader SR-650-101 Installation Guide 17
Figure 2-2 Power cable
3. Ensure that the heat shrink tubing is protecting the power cable’s
connector shell.
Position the heat shrink tubing so it is not completely against the
reader’s connector panel and covering the entire connector shell but
is .25 of an inch (6.35 mm) from the connector panel.
4. Apply heat to the heat shrink tubing to contract and bind the protective
covering to the power cable and its connector shell.
For detailed instructions regarding application of the heat shrink tubing,
follow the procedures in Appendix B.
Warning: To avoid static electricity shock, connect the network
cables before applying power to the Savi fixed reader. Complete
“Connecting the Network Cables” on page 18, and then proceed
to “Applying Power to the Savi Fixed Reader” on page 25.
Connector shell
Plug to AC outlet