User's Manual

CHAPTER 2 Designating Locations and Connecting Cables
16 Savi Fixed Reader SR-650-101 Installation Guide
You can also power the Savi Fixed Reader SR-650-101 from a Savi Solar
Power Module or by vehicle power. A fixed-length, molded cable is
supplied with the Solar Power Module. You can purchase the Vehicle
Power Cable as an accessory.
To connect the power cable to the reader:
1. If you are installing the Savi Fixed Reader SR-650-101 in an outdoor
location, slide heat shrink tubing onto the power cable before connecting
the cable to the reader.
2. On the Savi fixed reader, plug the cable’s female connector into the
power input socket. See Figure 2-1.
a. Turn the connector to align its notch on the side nearest the Savi
fixed reader’s dome.
b. Firmly push the locking ring forward and rotate it clockwise to lock
the connector.
Figure 2-1 Power connector
Insert the female connector
of the power cable into the
power input
Connector
panel