User's Manual

CHAPTER 3 Managing the Reader Network
30 Savi Fixed Reader SR-650-101 Installation Guide
To change the parameters for the BOOTP server:
1. Change the value of BootP from 0 to 1.
This activates the BOOTP server.
2. Obtain an IP address or group of IP addresses from your Network
Administrator to change the value(s) of the BootpIpAddress(es) for
your reader(s).
3. Set the subnet mask and gateway IP.
Name (Key) Type Range Default Description
Bootp Integer 0 or 1 0 Determines whether
BOOTP server is enabled
or not
0 = No
1 = Yes
BootpIpAddress String 0.0.0.0 Beginning IP address for
BOOTP IP address
assignments. The BOOTP
server begins assigning IP
addresses with this
address and increments
by one for each additional
address to be assigned
BootpSubnetMask String 255.255.128.0 Subnet mask to be
assigned to devices that
are also assigned an IP
address through the
BOOTP server
BootpGatewayIP String 0.0.0.0 IP address of the default
gateway to be assigned
to devices that are also
assigned an IP address
through the BOOTP
server