User's Manual

Appendix A
Savi Fixed Reader SR-650-101 Installation Guide 51
5. Type hostip=10.7.20.18 (or whatever valid IP address you want to
assign to the SmartChain Site Manager) and press Enter to set the
reader host IP address. This will point the Savi Fixed Reader SR-650-
101 to the SmartChain Site Manager’s IP address.
Figure A-14 Telnet Host IP address display
6. Type reset and press Enter to apply the host IP address.
The host is the computer to which the reader sends the event data.
7. Type netmask=255.255.128.0 (or whatever valid mask you want to
assign) and press Enter to set the reader network mask as depicted in
Figure A-15.
Figure A-15 Telnet network mask display
8. Type reset and press Enter to make the netmask take effect.
9. Type ntpserverip=10.7.20.18 (or whatever valid NTP address you
want to assign) and press Enter to set the NTP server IP address that the
reader will listen to.