User's Manual

Appendix A
48 Savi Fixed Reader SR-650-101 Installation Guide
Figure A-8 Telnet Client window
3. At the first prompt, type set LOCAL_ECHO and press Enter to enable the
echo so you can verify key entries.
4. At the second prompt, type open 10.7.19.11 10011 (this is the
CADTP port number) and press Enter to connect to the reader.
Figure A-9 Telnet connection commands
You see a blank Command Prompt - telnet window if the telnet
connection is successful.
Now you can run commands to modify the properties of the reader.