User's Manual

Appendix A
46 Savi Fixed Reader SR-650-101 Installation Guide
Pinging the Savi Fixed Reader
You need to check the network connection from your computer to the
Savi Fixed Reader SR-650-101. You can either use an Ethernet cross
connect cable from your PC’s Ethernet port to the Ethernet cable from
the Savi Fixed Reader SR-650-101 (with a coupler) or connect both your
PC and the Savi Fixed Reader SR-650-101 to a live local area network.
You use the command prompt to ping the reader.
To ping the reader:
1. At the host computer desktop, select Start > Programs > Accessories >
Command Prompt to open a DOS session.
Figure A-6 Command Prompt window
2. Type ping 10.7.19.11 (this is the default IP address of the reader) and
press Enter.
Pinging proceeds until it completes all cycles.