User's Manual

Mounting the Savi Fixed Reader
Savi Fixed Reader SR-650-101 Installation Guide 37
Caution: The reader must be mounted in a horizontal plane with its dome
directed downward, as shown in Figure 4-1. Other orientations will distort
the field patterns and make performance unpredictable. Maintain the
horizontal orientation when using the wall mount kit, tripod, or other
mounting hardware.
Mounting the Savi Fixed Reader
You can mount the Savi Fixed Reader SR-650-101 using any of the
associated mounting hardware available from Savi Technology.
The mounting kit available from Savi Technology includes hardware to
mount a Savi fixed reader on a pole (wooden, metal, or concrete), I-beam,
wall, or a tripod. Refer to the instructions included with the mounting kit
for proper installation.
RFID hardware can be physically attached in any position or location.
If your installation requires a special attachment, Savi can develop and
manufacture a custom fixture.
If you have problems communicating with the Savi fixed reader during
or after the installation, refer to Chapter 5, “Reader Sustainment and
Maintenance,” for troubleshooting procedures.