User's Manual
Table Of Contents
- Savi Fixed Reader SR-650-101
- Installation Guide
- Contents
- Introduction
- Savi Fixed Reader SR-650-101 Installation
- Maintenance
Setting Up the Savi Fixed Reader SR-650-101
Savi Fixed Reader SR-650 Installation Guide 33
Figure 2-23 Telnet NTP server time out command
4. Type aheadtime=2 (unit: seconds) and press Enter to set the time (in
seconds) that the reader will take ahead of the synchronized NTP server
time.
Figure 2-24 Telnet reader ahead time command
5. Type now? and press Enter to display the current time.
If the reader is not set to synchronize with an NTP server then you can
also set the time with this command.