User's Manual

Mounting the Savi Fixed Reader
Savi Fixed Reader SR-650 Installation Guide 15
The collection range of the equipment depends on surrounding obstructions
that may shield tags from receiving reader signals or cause reflections into
locations outside the line-of-sight. As a first step, it is best to identify reader
installation locations using a line-of-sight model to any assets equipped
with tags. You may need to experiment to cover the desired area.
To optimize performance:
◆ Locate the reader approximately 15 to 30 feet above the ground.
◆ Avoid installations within 6 feet (2 meters) of metal surfaces, such as
temporary buildings or large steel doors.
Caution: The Reader must be mounted in a horizontal plane with its dome
directed downwards, as shown in
Figure 2-1. Other orientations will
distort the field patterns and make performance unpredictable. Maintain
the horizontal orientation when using the wall mount kit, tripod, or other
mounting hardware.
Mounting the Savi Fixed Reader
You can mount the Savi Fixed Reader SR-650-101 using any of the
associated mounting hardware available from Savi Technology. However,
you might want to be sure that the reader is operational and verified on the
network before mounting it in any hard-to-reach position.
The mounting kit available from Savi Technology includes hardware to
mount a Savi Fixed Reader on a pole (wooden, metal, or
concrete), I-beam,
wall, or a tripod. Refer to the instructions included with the mounting kit for
proper installation.
RFID hardware can be physically attached in any position or location. If
your installation requires a special attachment, Savi
can develop and
manufacture a custom fixture.
If you have problems communicating with the Savi Fixed Reader during or
after the installation, refer to Chapter 3, “Maintenance,” for troubleshooting
procedures.