User's Manual
Table Of Contents
- User Guide
- About the Savi Mobile Reader SMR-650 and Mobile Computer
- Assembling and Using the Intermec Holster
- Recharging Batteries
- Printing Labels
- SMR-650 Reader Specifications
- Hardware Components
CHAPTER 3
Savi Mobile Reader SMR-650 User Guide 17
Recharging Batteries
3
Recharging the SMR-650-212
Reader Battery
The SMR-650-212 Reader has a Lithium-Ion internal battery that is not
replaceable.
To recharge the SMR-650-212 Reader battery, use the power
cable and power supply with the 1/8-inch (3.2 mm) jack that Savi provides.
You can also use the power cable, power supply, and Intermec dock to
recharge the mobile device. Recharging both units simultaneously using the
Intermec dock is the preferred method.
1. Ensure that your SMR-650-212 Reader is securely connected to the
Intermec 751G/A Mobile Computer.
Note:
The LF transmitter of the mobile reader is not functional
when it is recharging.
2.
Plug the 3-prong connector of the power cable into an active power unit.