Quick Reference Guide

CHAPTER 4 Printing Labels
34
IrDA Printing Troubleshooting Tips
If you have problems printing using the IrDA port:
◆ Hold the PDT81XX IrDA lens steady 3-inches to 6-inches over
the PT47X IrDA lens and then select Print.
◆ Verify that the smm.properties file has the correct information:
a. Open the My Pocket PC directory and go to the
\Application\Savi\SMM\6.0 directory.
b. Find the smm.properties file and copy it to the local PC’s desktop.
c. Open the file with a text editor and modify it as follows:
PRINT.PrinterPort.Name=COM1:
PRINT.PrinterPort.UseIR=True
d. Save and close the smm.properties file and place the newly
modified file in the original \Application\Savi\SMM\6.0 My Pocket
PC directory.
e. Select Ye s to replace the original file.
Printing with the Serial Interface
Cable
To print using the serial interface cable, you must use Microsoft Active
Sync to edit the SmartChain Mobile Manager properties file on the Symbol
81XX. The following steps assume that Active Sync is installed on the
desktop or laptop PC.
To modify the properties file:
1. Exit the SmartChain Mobile Manager application.
2. Disconnect the SMR-650P Reader and insert the Symbol handheld into
the charging cradle.
3. On the local PC desktop, select the My Computer icon and open
Mobile Device.
4. Open the My Pocket PC directory and go to the
\Application\Savi\SMM\6.0 directory.