Quick Reference Guide
Table Of Contents
- Quick Reference Guide
- Savi Mobile Reader SMR-650P-210 and SMR-650P-211
- Welcome
- Savi Mobile Reader SMR-650P and Handheld Device Description
- Connecting the SMR-650P Reader and Charging the Battery
- Printing Labels
CHAPTER 3
Connecting the SMR-650P Reader and Charging the Battery
26
Verifying the SMR-650P Reader
Connection
To check the connection, you must have SmartChain Mobile Manager
installed on the handheld device. For installation instructions, see the
Savi SmartChain Mobile Manager Administrator Guide.
1. Turn on the handheld device.
2. Start SmartChain Mobile Manager.
3. To verify that the SMR-650P Reader is connected properly, check the
connection icon in the lower left.
If the unit is not communicating with Savi RFID tags, use the reset button
to reboot the SMR-650P Reader.
SMR-650P Reader is connected
SMR-650P Reader is not attached properly