Quick Reference Guide

CHAPTER 3
Savi Mobile Reader SMR-650P Quick Reference Guide 21
Connecting the
SMR-650P Reader and
Charging the Battery 3
Connecting the SMR-650P Reader
to the Symbol Handheld Device
You connect the custom Symbol cable of the Savi Mobile Reader
SMR-650P-211 to a port located at the bottom of the handheld device.
Use the SMR-650P-211 Reader carrying case so you can easily hold both
the handheld device and mobile reader in one hand.
As you follow these steps, refer to the corresponding photos on the next
page.
1. Insert the Symbol device into the boot of the custom cable.
2. With the back of the carrying case facing you, unbutton and unzip the
case for the handheld device. Unzip the pocket for the SMR-650P-211
Reader.
3. Slide the Symbol device and connected mobile reader into the case.
4. Zip and button the back of the case.
5. Unscrew the external antenna.
6. Insert the SMR-650P-211 Reader into the pocket and zip it into place.
7. Open the velcro flaps on the side panel. Insert the cable of the reader
so
it is inside the flap. Close the velcro flap.
8. Reattach the external antenna.
9. Put the strap over your neck to prevent the handheld and reader from
slipping from your hands (picture not shown).