Quick Reference Guide

CHAPTER 2 Savi Mobile Reader SMR-650P and Handheld Device Description
20
Reset Pinhole
The reset pinhole is located on the back panel of the SMR-650P-211 Reader.
Inside the pinhole is a reset button, which you can use to reboot the
SMR-650P-211 Reader if the unit is not communicating with Savi RFID tags.
Use the tip of an unfolded paper clip or a similar object without a sharp tip
to gently press the reset button. The unit is rebooted when you hear a click.
Note: Before rebooting, examine the connections between the
SMR-650P-211 Reader and the Symbol handheld. See “Connecting the
SMR-650P Reader and Charging the Battery” on page 21. Verify that the
mobile reader has a fully charged battery by checking the battery icon on
the SmartChain Mobile Manager page. See “Checking the SMR-650P
Reader Battery” on page 27.