Quick Reference Guide

SMR-650P Reader Specifications
Savi Mobile Reader SMR-650P Quick Reference Guide 11
Power Primary: Rechargeable and non-replaceable Li-Ion battery
(3.7V @ 420mAh up to approximately 500 recharging
cycles (80% or more of full battery capacity))
Battery capacity: Approximately 3 to 4 days of continuous
operation based on the following usage:
✦ 8 hours per day with a single tag interrogation every 30
seconds (120 times in 1 hour)
✦ Transmitter is active for 300 ms during single
interrogation
✦ UHF receiver is active for 10 seconds during each
interrogation
Charging: 250 mA maximum charge current required. 2
hours to charge Li-Ion battery with AC adapter. AC adapter
has an input range of 100 to 240 VAC and an output of
5V +/- 10% regulated at maximum 1 Amp
NOTE: Inactive DTR line or disconnected serial link will
automatically put unit in standby mode to conserve battery
life
Battery status LED: Green status LED indicates various
battery operating modes
Regulatory approvals Radiated emission (intentional): U.S. emission standards
as contained in FCC Part 15 and European Community
emission standards as contained in EN 300 220-1
(433 MHz) and EN 300 330 (123 KHz)
Electromagnetic immunity: ESD compliance
Exposed to 8 kV air discharge or 4 kV contact discharge in
accordance with EN 301 489-1
Radiated immunity (unintentional): European Community
immunity standards as contained in EN 301 489-1
Safety approval:
AC adapter: U.S. UL 1950 and European EN 60950
Handheld mobile
reader mounting
Handheld carrying case
(Savi model number: HCC-650P-01) attaches the
SMR-650P-211 Reader to a Symbol 8100 or 8146.
Includes shoulder strap
Options SMR-650P-210 with DB-9 connector for use with laptop
and desktop PCs
Software requirements SMR-650P-211 requires SmartChain Mobile Manager;
SMR-650P-210 requires SmartChain Client Tools