User's Manual

Mounting with Rivets
1. Determine where the tag is to be attached to the asset.
2. Mark the location of the tag rivet holes on the shipping container or asset.
3. On the asset, drill holes at the locations you marked in step 2.
4. Return to the location where the tag is to be attached to the asset. Align the rivet holes on the tag with the rivet holes
you made in step 3.
5. Push the head of the rivets through the tag.
6. Use a handheld rivet gun to clip the nail of the rivet and secure the tag to the asset. Avoid fastening the rivets too
tightly to prevent damage to the tag.
Mounting on a Vehicle
The ST-616 tag can be mounted on a vehicle. The preferred mounting location is on the license plate in the back of the
vehicle, as shown in the following gure:
When mounting the tag on a vehicle, ensure the following:
OpenTopic | Savi ST-616 Asset Tag Description | 9
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/