User's Manual

1. Lift one end of the RFID tag with a putty knife or chisel and separate the tape.
2. Remove the tape on the tag or mounting surface by rubbing with dry thumbs.
3. Use a scouring pad with a mild soap and water solution to remove remaining adhesive.
Store Tags in an Ambient Location
The tag battery is affected by temperature. Store tags below room temperature of 25°C (77°F) whenever possible.
Contacting Savi Support
If you cannot find the information you need, contact Savi Support Services.
• Check http://supportcenter.savi.com for contact information.
• Send an email to [e-mail].
• Call 1-888-994-SAVI (North America only) or 1-650-316-4760 between 5 a.m. and 5 p.m. Pacific time.
When you contact Savi Support Services by telephone or email, have the following information available:
• Contact information (company name, your name, email, and phone number)
• Problem description
• Software version
• Product type
• Serial number or license information
Specifications
ST-616-001: Asset tag with non-replaceable battery
Model Number
Dimensions: 7.8" (19.8 cm) x 0.1" (2.5 cm) x 0.7" (1.7 cm)
Physical Characteristics
Weight: Less than 3 ounces (85g)
Color: Green
Temperature: -32°C to +70°C operating; -40°C to +85°C storage
Environmental
Humidity: 95% non-condensing
Vibration and shock: MIL-STD-810F
Weatherproofing: IP64
Manufacturing: RoHS Directive 2002/95/EC
Frequency: 433.92 MHz at 0.6 mW peak EIRP, FSK modulated
Wireless (UHF Transceiver)
Range: 300 ft. (100m) operating read/write range (outdoors, non-obstructed) from Savi
SR-650 Fixed Reader
Protocol: EchoPoint, ANSI INCITS 256
Frequency: 123 KHz
Wireless (LF Receiver)
Range: Greater than 20 ft. (6m) from Savi SP-651-211 Signpost or Savi SP-652-211 Signpost
Reader
14 | OpenTopic | Savi ST-616 Asset Tag Description
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/