User's Manual

Deactivating the Tag
To place the tag in hibernation mode.
1. Make sure the mobile device is disconnected from the external power supply.
2. From the Main menu, tap Tags & Devices > Hibernate Tags.
3. Tap Add.
4. Tap Collect to begin active tag collection.
5. Select a tag from the list and tap OK.
You can select multiple tags.
6. To add tags to the collection, tap Add and repeat steps 4 and 5.
7. When you finish adding tags, tap Hibernate.
8. Tap:
• New Hibernate Tags to disable UHF reception for other tags.
• Return to Main Menu to go back to the Main menu.
For more information, see the Savi SmartChain Mobile User Guide .
Removing Pressure Sensitive Tape-Mounted Tags
Savi recommends that you leave the tag attached to the asset for reuse, but if it is necessary to remove the tag:
OpenTopic | Savi ST-616 Asset Tag Description | 13
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/