Install Guide

Removing Pressure Sensitive Tape-Mounted Tags
SaviTag ST-614/ST-615 Installation Guide 25
Removing Pressure Sensitive Tape-
Mounted Tags
Savi recommends that you leave the tag attached to the asset for later reuse,
but if it is necessary to remove the tag:
1. Lift one end of the RFID
tag with a putty knife or
chisel and separate the tape.
2. Remove the tape on the tag
or mounting surface by
rubbing with dry thumbs.
3. Use a scouring pad with
a mild soap and water
solution to remove any
remaining adhesive.