Install Guide

Placing the Tag
SaviTag ST-614/ST-615 Installation Guide 17
Savi SmartChain Mobile Manager searches for and displays a list of all
SaviTag ST-654 within range and indicates if they can be enabled or
disabled.
4. Select a tag to disable its UHF receiver.
5. Select OK to close the confirmation message.
6. Select another tag to disable or select Done.
To wake the SaviTag ST-614/ST-615, follow the steps outlined for taking
the SaviTag out of storage mode, as described in “Commissioning SaviTag
ST-614/ST-615” on page 13.
Placing the Tag
Savi Technology recommends that you mount SaviTag ST-614/ST-615 on a
flat surface. For optimal radio communication, place SaviTag ST-614/ST-
615 as high as possible, safe from impact (for example, between the ribs of
an ISO-type shipping container), and away from obstructions on the asset.
When SaviTag ST-614/ST-615 is mounted in its optimal position:
◆ It is mounted at no less than a 4-foot (1.21 meters) elevation.