User's Manual

Installation Guide For
SaviTag ST-602-14 Asset Tag
Page 4 of 5 pages ELECTRONIC COPY
NOT CONTROLLED IF PRINTED
Date Prepared Revision Revision Date Revision Approval
June 27, 2007 1.0 June 27, 2007 Ron Stein
DRAFT
- 4 - ST-602-14 Installation Guide
accept two or four rivets. The thickness of the shelf is 0.15 inch (.4 cm). Thus,, any chosen rivet
needs to extend the size of the target hole plus 0.15 inches
(.4 cm).
8. The tag may also be mounted using cable ties, small hook-and-loop straps, or equivalent. The
dimensions of the slots are 0.55 inch (1.4 cm) wide by 0.11 inch (.3 cm)thick.
Figure 5: Tag Dimensions