User's Manual
Table Of Contents
3UHSDULQJWKH6LWH
(FKR3RLQW6LJQSRVW,QVWDOODWLRQ*XLGH
3UHSDULQJWKH6LWH
Mounting a Signpost requires no specific site preparation. The criteria
for placement and the preparation include the considerations listed in
Table 2-2.
7DEOH 6LWH3UHSDUDWLRQ&RQVLGHUDWLRQV
Consideration Addressed by ...
Safety Avoid selecting a Signpost installation location
where harm to the equipment or personnel is
possible.
Power Select an installation location where power is
accessible.
Space Allow sufficient space to install the Signpost.
Coverage Make sure that the installation location is
appropriate for capturing data.
Models SP-600-201 and SP-600-211 Signpost
coverage is a rectangle with rounded corners that
is approximately 12 feet by 10 feet, measured on
the floor under the Signpost antenna.
Models SP-600-101 and SP-600-111 Signpost
coverage is a circle with a radius that is
approximately 6 feet.
Note:
The exact size and shape of these patterns
is dependent on several parameters, such as
initial power settings during installation, ambient
noise levels, and nearby obstructions. When
installing, you need to experiment to determine
actual performance based on needs.
Placement Signposts should be placed adjacent to a portal
or other choke point, covering an area where the
assets must pass or be stored.