User's Manual
(FKR3RLQW6LJQSRVW,QVWDOODWLRQ*XLGH
,QWURGXFWLRQ 1
This guide describes how to install the EchoPoint Signpost, including
hardware installation and using the software to configure the Signpost.
Signposts are short-range transmitters which provide their identity
information to the EchoPoint 600 series tags (Tags) that are within
range. A Tag uses this information to relay positional information
about itself to an EchoPoint Reader SR-600-101 (Reader). The
Reader then provides this information to a database for use by Savi
SmartChain system software where it is used for asset management.
This chapter introduces the Signpost types, and provides references
to other chapters having detailed Signpost setup, installation,
and configuration information. EchoPoint Signposts are used in
conjunction with other Savi equipment, including the Savi Site
Servers and Readers. Installation and use of these components is
documented in their respective user guides. For information on setting
up the EchoPoint Reader SR-600-101, refer to the EchoPoint Reader
SR-600-101 Installation Guide. For information on setting up a Savi
Site Server, refer to the Site Server Installation Guide.