User's Manual

6LJQSRVW6\QFKURQL]DWLRQ
(FKR3RLQW6LJQSRVW,QVWDOODWLRQ*XLGH 
6LJQSRVW6\QFKURQL]DWLRQ
For a transmit group to work, the Sync cable must be connected
between the Signposts. These optional cables are available from Savi
in variable lengths.
» To cable a Signpost for synchronization:
1. Connect the female end of the cable to the Sync In connector of
the Signpost.
2. Connect the male end of the cable to the Sync Out connector of
another Signpost in the synchronized group.
3. Create group number assignments.
See “Configuring Signpost Operation Settings” on page 3-3.