Elliott Laboratories. Inc.
Gravitas 410 Installation Guide Version 2.0 Mounting the Tag Tools and Materials + marking pencil ¢ drill with #7 (201) bit « weatherproof sealant {any commercial RTV sealant) two 10-32 bolts, 0.75" long plus the thickness of mounting surface; #304 stainless steel two matching washers and nuts, #304 stainless steel . adjustable wrench + Phillips (cross-point) screwdriver * two screws, 8-32, A {provided} + 3.
Replacing the Battery Tools and Materials * replacement 3.6V lithium battery, size AA Caution When working on a ladder, quid dropping objects enable people below il Remove the battery cover: push firmly against the grooved thumb plate to release the catch and slide the cover slowly down as shown, Note When removing the battery cover, hold it as it comes loose to prevent dropping it 1 Push to release catch. 2. Tide to remove cover. [J Remove the discharged battery from its compartment.
Gravitas 410 Federal Communications Commission (FCC) Label Federal Communications Commission (FCC) Notice The Federal Communications Commission has established technical standards regarding radio frequency energy emitted by computer devices. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
