User Manual

Savi MobileReader 410R Quick Reference Guide v
Software-Restricted rights at FAR 52.227-19 as applicable. The contractor and manufac-
turer is Savi Technology Incorporated, 450 National Avenue, Mountain View,
CA 94043-2238.
REGULATORY APPROVALS
The SMR-410R is UL listed (UL 1950), when powered by the NiCad battery or the exter-
nal AC adapter (P/N 042684) operating through the Interface Adapter.
LASER COMPLIANCE AND CAUTION
This device is a Class II laser product (CFR 21, Subpart J) and has a maximum out-
put of 2-5 mw at 670 mm.
NONINCENDIVE INFORMATION
This product is UL Listed as Nonincendive (UL-1604) for use in the following Divi-
sion 2 hazardous locations:
• Class I - Groups A, B, C and D
• Class II - Groups F and G
• Class III
• Temperature Code: T4A
• Maximum operating Ambient: 50 °C
The SMR410R is considered nonincendive only when used alone and powered by the
NiCad battery pack. Make no other connections while in Division 2 hazardous loca-
tions.
There are no restrictions on the type of PC card that can be used in a Division 2 loca-
tion. However, this card may only be changed while in an area known to be non-haz-
ardous.
WARNING: This product is rated Nonincendive as long as it is not abused or dam-
aged, and is used according to its operating instructions. If these conditions are not
met, this device must not be operated in a Division 2 environment.