Savant® Wireless Thermostat (SST-W100) User Guide Date: June 2013 Part Number: 009-0957-00 Copyright 2013 Savant Systems LLC, SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC. All brand names, product names and trademarks are the property of their respective owners. Savant Systems, LLC reserves the right to change product specifications without notice.
Contents To access the hyperlinks to the topics in this document, click the topic or topic page number. System Overview ...........................................................................................................................................................3 Setting the System Mode ............................................................................................................................................4 Special Heat Pump Mode: Emergency Heat .............................
System Overview The Savant® Wireless Thermostat (SST-W100) is a Wi-Fi enabled digital thermostat designed to control Heating, Ventilation and Air Conditioning (HVAC) systems. The SST-W100 communicates wirelessly over Wi-Fi to a Savant System. The SST-W100 is designed to integrate seamlessly into a Savant controlled environment with RacePoint Blueprint™.
Setting the System Mode There are four system modes: Off, Heat, Cool and Auto. Mode Description Off System is off. No heating or cooling. If system is on, it will shut off immediately. Heat Only heating will occur. Cool Only cooling will occur. ION Heating or cooling will come on according to the heating and cooling setpoints. Auto System type before The system will automatically switch between heating and cooling modes as needed to T! You must set the HVAC operating the thermostat.
MENU OFF MODE AUTO FAN HOLD Press the MENU button to go to the main menu screen INSTALLATION Fan Mode IMPORTANT! You must set the HVAC System type before operating the button thermostat. System Status Indicators When theismain thermostat screen displayed, thethe system status After the thermostat installed and powered up,ischeck and set HVAC systemis indicated. In this example; the System is Off. Menu Selection configuration setup as needed.
Setting the Heating or Cooling Temperature Setpoint Before setting the Setpoint, check the System Status on the LCD display. The correct system mode must be selected before either the heating or cooling setpoint can be set or changed. To change the Heat Setpoint, the system mode must be in the Heating mode. To set the Cool Setpoint, the system mode must be in the Cooling mode. If the system is in Auto mode, the mode of the last system call will be displayed on the Setpoint screen.
TION Setting Fan Mode NT! You must set the HVAC type the thermostat. The Fan System mode can bebefore either operating automatically operated by the HVAC system when it is setup through the Installer or manually set on the main thermostat screen. ermostat is installed and powered up, check and set the HVAC system Press the Fan Mode button manually change n setup as needed. 1. Follow the steps below to select the to correct HVAC systemthe fan mode.
ION T! You must set the HVAC System type before operating the thermostat. Main Menu Selection rmostat is installed and up, check and set the system Thepowered Menu Selection screen is HVAC used to view and set all the information for the thermostat. LATION n setup as needed. Follow the steps below tobutton selectto theget correct system 1. Press the Menu to theHVAC Menu Selection screen. LATION ANT! You must set the HVAC System type before operating the thermostat.
Configuring the HVAC Schedule The Savant Wireless Thermostat is integrated with Savant’s TrueControl™ app and can be programmed from an Apple® iOS device. The HVAC user interface provides access to control a zone and display the indoor and outdoor temperatures, and humidity values. This includes the ability to change the heat, cool and humidity setpoints and schedule these values for specific times of the day, week, season, and vacation.
User Settings 1. 2. Select User Settings. Press Select to go to the User Settings screen. Select button 3. The User Settings screen displays. Menu Options • Set Clock • Filter Service • Maint.
Set Clock To set the clock, follow the steps below: 1. 2. 3. 4. 5. 6. Press the Menu button to get to the Menu Selection screen. Use the up and down arrows to select the appropriate menu item. Select User Settings. Press Select to go to the User Settings screen. Scroll down to Set Clock. Press Select to display the Set Clock screen. 7. 8. 9. Use the navigation keys with the arrows on them below the data to highlight the information you want to change.
8. To adjust the service interval, use the +/- buttons. 9. Press Reset to clear the service alert and reset the runtimes to zero after maintenance has been completed. To reset the Heat and Cool runtime hours, follow the steps below: 1. Press the Menu button to get to the Menu Selection screen and go to the Filter Service screen. 2. Press Reset to clear the Heat and Cool runtime values and reset the runtimes to zero. 3. Press the Done button twice to exit back to the main thermostat screen.
F/C Settings To manually select the Fahrenheit or Celsius temperature scale, follow the steps below: 1. 2. 3. 4. 5. 6. Press the Menu button to get to the Menu Selection screen.. Use the up and down arrows to select the appropriate menu item. Select User Settings. Press Select to go to the User Settings screen. Scroll down to the F/C Settings screen. Press Select to display the F/C Settings screen. 7. 8. Use the +/- buttons to change the temperature scale.
Backlite/Display To set the backlight timeout period and adjust the display contrast, follow the steps below: 1. Press the Menu button to get to the Menu Selection screen.. 2. Use the up and down arrows to select the appropriate menu item. 3. Select User Settings. 4. Press Select to go to the User Settings screen. 5. Scroll down to Backlite/Display. 6. Press Select to display the Backlite/Display screen. 7.
Important Notice Disclaimer The contents of this document are subject to change without notice; therefore, the information presented herein shall not be construed as a commitment or warranty. Savant Systems, LLC shall not be liable for any technical or editorial errors or omissions contained herein or for incidental or consequential damages resulting from the performance, furnishing, reliance on, or use of this material.
Safety Read First Before installing, configuring and operating SAVANT® equipment and other vendor equipment, SAVANT® recommends that each dealer, installer, etc. access and read all the required technical documentation. The SAVANT® technical documentation is located on the SAVANT® Dealer Portal. Vendor documentation is supplied with the equipment. Read and understand all safety instructions, cautions and warnings in this document and the labels on the equipment.
Safety Statements Follow all of the safety instructions listed below and apply where applicable. Additional safety information will be included where applicable and listed below. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
