Quick Start Guide

CHARGE BATTERY
USING THE LIGHT IN WHITE DAYLIGHT MODE
USING THE LIGHT IN COLOR MODE
(5) Press the “Color” knob and the light switches to its six RGB color bulbs.
(6) The light will initially default to red with a corresponding value of 0 on the LCD display.
Color Reference:
0 = Red
100 = Green
200 = Blue
(7) As the "Color" knob is turned clockwise, 300 distinct colors can be dialed in.
Each color has it's own unique reference number displayed on the LCD
readout allowing the user to record the color used for future use.
Note: The RGB300 cannot be dimmed when in RGB mode. Only the color is adjustable.
To reduce light, user must move the RGB300 further from the subject.
(8) Push the "Power" button to turn off.
(1) Charge the included NPF-750 battery by inserting into the included charger.
(2) The LED light on the front of the charger will be red while charging and change
to green when the battery is at full power.
(3) Press the "Power” button to turn on. Light will default to the twelve 5700 Kelvin bulbs.
(4) The power can be adjusted by turning the "Power" button. Light can be steplessly
adjusted from 20% to 100% and power level is visible on rear display.
BATTERY BATTERY CHARGER
CHARGE INDICATOR LIGHT
Kelvin Temperature
Battery Level
Color Reference Number
Battery Level
Power Level
Usage
Instructions
- Press “Power” button to turn on/off
- Rotate to adjust power level
- Press “Color” button to switch to color mode
- Rotate to change colors