User's Manual

ManualsBrandsSavage ManualsAll LED Lights12" Bi-Color RGB Tabletop Ring Light with Stand and Carrying Case

12” TABLETOP RGB RING LIGHT

USAGE INSTRUCTIONS

professional photography made simple

800.624.8891 savageUniversal.com

POWER BUTTON

DISPLAY

CONTROL KNOB

TEMPERATURE

HUE

DAYLIGHT MODE

ADJUST

TEMPERTURE

SELECT HUE

RGB MODE

Setting Up:

(1) Loosen the knob at the base of the stand to extend the legs outward at a 45° angle

from the table for the most secure position. Tighten the knob to secure the legs. Flip open

the knob on the stand upright to extend it to your desired height, and close to lock.

(2) Loosen the lower knob on the lightstand adapter at the bottom of the ring light and

slide onto the top of the light stand. Tighten the adapter knob to secure.

(3) If tilting is desired, loosen the upper knob on the lightstand adapter, tilt to desired angle

and retighten. Always tilt the light over one of the three legs for stability.

(4) Plug the AC power cord into a household socket.

(5) If desired, slide the included mirror into the shoe mount located at the bottom inside of

the ring light. Tighten the knurled knob above the mirror shoe mount to secure it in place.

(6) If you are using the camera on your mobile phone, tighten the included bendable arm

with attached phone holder into either of the (2) ¼”-20 threads on the bottom front of the

ring light.

(7) Press the side of your mobile phone into the top of the phone holder. The holder will

expand until it has gripped both sides of the phone. The arm can be bent to achieve any

desired camera angle.

Ring light is also compatible with any standard light stand; simply place bottom bracket over light stand adapter and

tighten side knob to secure.

Ring light Control Settings

Press the red On/Off Power button. The ring light will turn on and display either a daylight

temperature reading between 3200K and 5500K or “H” followed by a number between

0 – 36, if last used in RGB Mode.

FOR DAYLIGHT USE:

If the ring light displays the letter “H” followed by a number, hold the control knob down for

2 seconds. The ring light will switch from RGB mode to daylight mode. In this mode, you

can adjust the Kelvin temperature from 3200K to 5500K.

3200K Will provide a warm look similar to a cool white incandescent bulb.

5500K Will simulate true daylight and will give the most accurate color reproduction. You

can also select a wide range of Kelvin temperatures between 3200K and 5500K to match

available light in your current environment.

Once the desired color temperature is set, press the control knob once. The display will

show a “P” followed by a number between 10 – 100 to represent the power level of the

light output. Turn the control knob counterclockwise to reduce the light output or clockwise

to increase.

FOR RGB COLOR USE:

If the ring light displays a number between 3200 - 5500, hold the control knob down for 2

seconds. The display will show a “H” followed by a number to represent the selected

hue. In this mode, you can select between 360 different colors.

0 = RED, 120 = GREEN, 240 = BLUE

Other values are a combination of red, green and blue to achieve all other possible colors.

Once the desired color is set, press the control knob once. The display will show a “P”

followed by a number between 10 – 100 to represent the power level of the light output.

Turn the control knob counterclockwise to reduce the light output or clockwise to increase.

Summary of content (4 pages)

PAGE 1
® 12” TABLETOP RGB RING LIGHT ® USAGE INSTRUCTIONS Setting Up: (1) Loosen the knob at the base of the stand to extend the legs outward at a 45° angle from the table for the most secure position. Tighten the knob to secure the legs. Flip open the knob on the stand upright to extend it to your desired height, and close to lock. 7 6 5 2 (2) Loosen the lower knob on the lightstand adapter at the bottom of the ring light and slide onto the top of the light stand. Tighten the adapter knob to secure.
PAGE 2
® ® 12” TABLETOP RGB RING LIGHT USAGE INSTRUCTIONS SAVAGE LIGHT MANAGER APP Smart Phone App The Savage 12” Tabletop RGB Ring Light can be controlled remotely using the free Savage “Light Manager” App available for download in both the Google Play Store and Apple App Store. To locate, search “Light Manager” and look for the icon pictured on the right of this page. COLOR WHEEL (1) With the Bluetooth setting on your phone enabled, press the light’s power switch on.
PAGE 3
® ® 12” TABLETOP RGB RING LIGHT MUSIC FUNCTION Your Savage 12” Tabletop RGB Ring Light can be used to pulse with your music and audio files stored in your media library. The pulsing light will cycle through the various colors (rainbow effect) available and match the beat of the music or voices for audio recordings. It is not possible to specify a specific color in this function. Upon launch, the app will ask for access to your device’s media libraries.
PAGE 4
® ® 12” TABLETOP RGB RING LIGHT USAGE INSTRUCTIONS MANAGING BULBS Manage Bulbs CLICK LIST BUTTON FOR ANDROID: Name your ring light: Tap the “List” icon at the top left of the app. A side bar will open up that lists “Manage Bulbs” Click the “Settings” icon next to “Manage Bulbs”. You should see the light listed. It will begin with “Magic….” Tap the wrench icon next to the listed light. A box will open to rename. Type in the name of your choice and select OK.