User Manual
Manage Bulbs
FOR ANDROID:
Name your panel:
Tap the “List” icon at the top left of the app. A side bar will open up that lists “Manage Bulbs”.
Click the “Settings” icon next to “Manage Bulbs”. You should see the panel listed. It will begin with “Magic….”
Tap the wrench icon next to the listed panel. A box will open to rename. Type in the name of your choice and select OK.
If you have multiple panels, it is possible to control them separately using the Savage Light Manager.
IPHONE:
Tap the “List” icon at the top left of the app. A sidebar will open up that lists “Group Manage” and “My Device”. Click “Group
Manage”, then “Add”. Type in the name of your choice and select OK.
Repeat above steps to rename the second panel.
Important: If you are using the app on more than one phone, you can only pair the device/devices to one phone at a time.
If the device is paired to more than on phone at the same time, the functions will not work.
TO CONTROL MORE THAN ONE PANEL USING: DEFAULT GROUPS
Tap the “List “icon at the top left of the app
A side bar will open up that lists “Default Groups”
Tap on right pointing arrow next to “Default Group” and you should see each paired light panel.
Note: only panels that are currently turned on will be visible. If the panel is controllable with the app, it will be highlighted with a
blue background for Android or gray for iPhone.
If multiple panels are highlighted, then the app will control all at the same time.
If the panel does not have a blue/gray background, tap on it in the app. Blue/gray background will come on and the panel will
be controllable. Note: the bulb to the left of the named panel should appear to be lighted. If it does not, tap the bulb and it will
appear to light.
Note: The chain to the right side of the panel should appear unbroken, if the 2 links appear to be separated, tap on the chain
until they appear connected. Breaking the chain can be used when temporarily disabling the light from the app is desired. Only
highlighted panels will be controlled by the app. To control panels separately, tap any panel icon and the blue highlight will
disappear. That panel will no longer be controlled by the app allowing the user to control each panel independently.
MANAGING BULBS
CLICK LIST BUTTON
LIGHT MANAGER
Troubleshooting
Problem: Light behaves erratically.
For Android:
If the app has been running in the background for extended periods of time, the apps cache can ll up.
Solution:
To solve, close the “Savage Light Manager” app.
Go to “Settings” in your phone.
In settings, go to “Application Manager”.
Scroll to the app “Savage Light Manager”.
Tap “Storage”.
Tap “Clear Cache”.
This will likely solve the issue. Re-open the “Savage light Manager App” and re-try.
If light fails to pair with your device’s Bluetooth, GPS/Location Service may need to be enabled.
For iPhone:
Close out of the app completely and then re-open. You can also try to remove the battery from the panel and re-attach or restart the phone completely.
If you receive the error message “Unfortunately Light Manager has stopped.” when clicking on the Mood function, it’s likely that the Microphone permissions are turned off in
the app. Refer to the Mood section of the instructions for more info.
If another specic activity control is not functioning, refer to that activity’s section of the instructions for more info.
If the panel appears to be paired (BLE button on panel is on) z cannot be controlled, see instructions for Default Groups. The panel that is being used should be highlighted in
blue/gray, the bulb to the right of the device should appear on and the chain to the left of the described device should appear unbroken.
Problem: Light will not pulse to selected music on phone:
Solution:
Make sure the sound bar icon is green and not white. If white tap and it will turn green. Try playing music. If still not working, select the “List” icon at the left top of the app and
make sure the paired panel’s “Bulb” icon is lit and the “Chain links” to the left of the listed panel are unbroken. If “Bulb” is not lit, tap one time. If “Chain” appears broken, tap
one time. When the bulb appears lit and the chain links appear connected, go back to the “Music” menu and select play. The panel should now beat to the selected song in the
rainbow mode.
Problem: Mood function does not respond to your voice.
Solution:
Slide the white bar all the way to the right. If the function is working, the light should begin to pulse in rainbow mode to any sound in the room. If successful, slide the bar to
the left to gradually reduce the sensitivity of the speaker until the panel is only responding to you voice.If still not working, select the “List” icon at the left top of the app and
make sure the paired panel’s “Bulb” icon is lit and the “Chain” links to the left of the listed panel are unbroken. If “Bulb” is not lit, tap one time. If “Chain” appears broken, tap
one time. When the bulb appears lit and the chain links appear connected, go back to the “Music” menu and select play. The panel should now beat to the selected song in the
rainbow mode.
professional photography made simple
800.624.8891 savageUniversal.com
RGB PRO PANEL
USAGE INSTRUCTIONS
®
®