Instructions/Assembly Guide

BACKDROP TRAVEL KIT SETUP & USAGE

1. Remove backdrop frame from carry bag and

unfold top section upwards, and secure bracket

into mount clip.

2. Starting with the lower legs, unlock each leg lock

and expand leg section outwards to stabilize and

level the frame. Repeat these steps to extend upper

sections.

SavageUniverSal.com

3. Unfold backdrop and hang corner grommets

on hooks. Hang top 3 grommets rst, then lower

grommets.

4. Extend each frame section as needed to pull

backdrop taut and remove any wrinkles. Adjust rear

frame leg to ensure backdrop is upright and

vertical. If using 5’x12’ backdrop, sweep out and

remove any wrinkles.

PAGE 1
® BACKDROP TRAVEL KIT SETUP & USAGE 1. Remove backdrop frame from carry bag and unfold top section upwards, and secure bracket into mount clip. 2. Starting with the lower legs, unlock each leg lock and expand leg section outwards to stabilize and level the frame. Repeat these steps to extend upper sections. 3. Unfold backdrop and hang corner grommets on hooks. Hang top 3 grommets first, then lower grommets. 4. Extend each frame section as needed to pull backdrop taut and remove any wrinkles.