Manual

THE USE OF RELOADS, HANDLOADS, MILITARY SURPLUS, OR ANY OTHER COMMERCIAL/
NONCOMMERCIAL AMMUNITION NOT MANUFACTURED TO SAAMI (SPORTING ARMS AND
AMMUNITION MANUFACTURERS’ INSTITUTE, INC.)/ANSI (AMERICAN NATIONAL
STANDARDS INSTITUTE) SPECIFICATIONS WILL VOID THE WARRANTY.
KNOW YOUR GUN! IF ANYTHING ‘FEELS’ OR SOUNDS DIFFERENT WHEN LOADING OR
SHOOTING - STOP - AND HAVE A QUALIFIED GUNSMITH TAKE A LOOK! NEVER TAKE A
CHANCE WITH SOMETHING THAT YOU ARE UNSURE OF … ALWAYS ASK A
PROFESSIONAL.
DETACHABLE BOX MAGAZINE (CLIP)
FIGURE 3
1. With the muzzle pointed in a safe direction, move the safety forward to the SAFETY OFF –
READY TO FIRE position.
2. Lift the bolt handle but do not pull to the rear.
3. Move the safety fully rearward to the FULL SAFE position.
4. Pull bolt handle rearward.
The safety will move to the MID SAFE position automatically when the bolt is closed.
5. With one hand prepared to catch the detachable box magazine, push the magazine release
button on the bottom of the stock rearward (see FIGURE 6).
6. As shown in FIGURE 3, load the correct caliber cartridges into the detachable box magazine
by pressing downward, filling the magazine to capacity (see SECTION 6).
7. Insert the detachable box magazine back into the stock opening, pressing upward until the
latch is fully engaged.
8. Moving the bolt handle forward will push the first cartridge from the detachable box magazine
into the chamber.
WHEN THE BOLT IS FULLY CLOSED, A LIVE CARTRIDGE WILL BE IN THE CHAMBER.
ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION.
9. Move the safety fully rearward to the FULL SAFE position, locking the bolt handle.
TOP LOADING OR HINGED FLOOR PLATE (THROUGH THE EJECTION PORT)