Manual

5. The safety will move to the MID SAFE position automatically, allowing the action to be cycled
while the trigger is still being blocked.
6. Placing one hand over the ejection port, your finger completely away from the trigger and out
of the trigger guard, slowly pull the bolt handle to the rear to extract the cartridge from the
chamber.
7. Remove the cartridge with your fingers.
8. If the firearm is designed with a TOP LOADING magazine, push the bolt fully forward until it
engages the next cartridge behind the extractor (the bolt handle need not be pushed down).
9. Slowly pull the bolt handle to the rear to extract the next cartridge.
10. Repeat steps 6 through 7 until the magazine is empty.
LOOK AND FEEL! BE SURE THE CHAMBER AND MAGAZINE ARE COMPLETELY EMPTY --
DO NOT ASSUME!
A LOADED GUN HAS NO PLACE IN OR NEAR A CAR, TRUCK OR BUILDING.
HINGED FLOOR PLATE
1. Supporting the firearm with one hand, position your other hand under the hinged floor plate.
2. Push the release button as shown in FIGURE 7 to unlatch the Hinged Floor Plate.
FIGURE 7
3. Slowly allow the Hinged Floor Plate to rotate downward, releasing the cartridges into your
awaiting hand (see FIGURE 8).