Technical data

2000225294A

16.32 Control Box

For access, refer to section 16.1.

Remove relevant plugs and connectors, refer to wiring diagrams

section 15.

Withdraw grommets and leads so they are hanging loose.

Unthread the retaining cord and remove the control box by

drawing it outwards away from its retaining slots, see relevant

part of diagram 11.1.

16.33 Fuses PCB - Control Box

Remove the front casing, refer to the relevant part of section

16.1.

Drop down the control panel and undo three screws securing

the rear cover and lift up, see relevant part of diagram 11.1.

Remove the fuse holder from the mainPCB and replace fuse,

see diagram 16.22.

PCB - Transformer

For access, refer to section 16.1.

Refer to diagram 16.2 and wiring diagrams section 15.

Replace fuse.

16.34 230V Controls Option

For access, refer to section 16.1.

Gain access to the 230v controls optionPCB by unclipping the

control panel interface and carefully lowering forward, see

diagram 11.3.

Disconnect the electrical connection from the 230V controls

option PCB and the electrical connection from the main PCB.

Remove the 230V controls interface retaining screw.

Remove the 230V controls option PCB, see diagram 16.23.

Diagram 16.22

RETAINING CLIPS

SECURING

SCREWS (2)

THREE WAY

VALVE PCB

FUSE

HOLDER

16 Replacement of Parts

Diagram 16.23

230V CONTROLS

OPTION PCB

RETAINING

SCREW

12229

11419

(F24e/F28e ONLY)