Technical data

47
2000225294A
To carry out the electrical test, gain access to the Control Box
PCB, as follows:
Hinge down the control box.
Remove Torx screws and unhook the rear panel.
For layout of PCB, see (F24e / F28e) diagram 15.1 or
(F28e SB) diagram 15.1a
To check components see (F24e / F28e) Table 1 or
(F28e SB) Table 1a .
14 Fault Finding
Diagram 14.1a
11988
(F28e SB ONLY)