Installation manual

6
8 Appliance use
8.1 Control panel
1
2
4
3
7
6
5
Legend
1 Operating indicator
2 Display of the available pressure in the
heating circuit
3 Operating mode selection
4 DHW temperature adjustment
5 Display of the measured temperature in
the heating circuit
6 On/off switch
7 Heating temperature adjustment
8.2 Commissioning and lighting
Make sure that:
the
boiler is connected to the electrical
supply.
the gas service cock is open.
Push the switch (6) until the “I” symbol
appears.
The operating indicator on the control
panel turns on: the boiler is ready to
run.
•
-
-
•
Push “MODE” to modify the operating
mode of the boiler
. The ◄ symbol is
then situated in front of the selected
mode:
Central heating and
domestic hot water
Central heating only
Domestic hot water only
Appliance frost protection
•