Manual

25 GB 07.01
Care Extra
s
12.3 External metal surfaces
For the care and preservation of the external metal
and wood surfaces we recommend SAUER
Premium gun grease. Minute spherical Teflon
®
particles seal the pores of all wood and metal
surfaces and provide perfect protection and
optimal sliding characteristics.
Benefits:
• dry surfaces - dust etc. does not adhere;
• water and salt water proof;
• absolute corrosion protection;
• perfect sliding characteristics, reduced wear;
• resistant to sweaty palms;
• pressure resistant up to 57.000 kg/cm
2
;
• temperature resistant from -50 to +230 °C;
• perfect protection and care for steel and wood;
• neutral smell
Procedure:
1. Thoroughly clean the gun using suitable cloths
and cleaning agents.
2. Thinly apply the grease with a cloth or sponge
over the whole gun (including the stock)
including all mechanical and moveable parts.
3. After a reaction time of at least 60 minutes
wipe dry and polish the gun with a clean cloth.
4. Dependent on the weather and frequency of
use the protective effect will last between two
to six months.
Note:
• The sling swivel must also be cleaned and
oiled at regular intervals.
13 Extras
13.1 Installation of optional accessories on
the mounting rail
Procedure:
1. Insert accessory into the rear hollow of the
mounting rail and slide it to the front.
2. Position and fix accessories.
CAUTION!
Gun may be damaged
• Caring for the external metal surfaces is
particularly important in wet weather or if the
metal surfaces have come into contact with
sweaty body parts.
• Always wipe dry the gun prior to preservation.