Manual

Accessories
23 GB 07.01
11.3 Removing the mirage band
Procedure:
1. Remove the hook of the mirage band from the
forward scope rail mount and relax the mirage
band (see Fig. 24 top).
2. Unhook the twin claws of the mirage band
hook from the holes of the upper central slots
of the flash suppressor (see Fig. 24 below).
11.4 Installing the mirage band
Corresponding figure, see Fig. 24.
Procedure:
1. Insert the twin claws of the mirage band hook
into the hole of the upper central slots of the
flash suppressor.
2. Stretch the mirage band to the rear and slip
hook onto the forward scope mount.
CAUTION!
The mirage band is only loosely connected
with the gun
May lead to injuries and damage to the gun
• Keep the gun pointed in a safe direction in
order to prevent the mirage band from
injuring persons or damaging property if it
slips unintentionally.
Abb. 24
CAUTION!
The mirage band is only loosely connected
with the gun
May lead to injuries and damage to the gun
• Keep the gun pointed in a safe direction in
order to prevent the mirage band from
injuring persons or damaging property if it
slips unintentionally.