Manual

Dismantling
18GB07.01
8 Dismantling
8.1 Removing the stock
Procedure:
1. Open the bolt and remove it
(see section 5.7.2).
2. Slacken off and remove the rear 514 and front
512 stock retention screws.
3. Remove the filler piece 511 from the magazine
stock.
4. Lift the system out of the stock.
8.2 Removing the carrying sling
Procedure:
1. Unscrew the knurled knob Fig. 17/A to the left.
2. Press in the knurled knob with the plunger and
twist it by 90° to the left.
3. Remove the sling swivel.
Note:
• Clean and oil the sling swivels regularly.
WARNING!
Gun is ready to fire
May lead to death or severe injuries
• There must be no magazine in the gun.
• Before stripping your gun, ensure once again
that it is unloaded (see section 5.6).
Abb. 16
514 512511
Abb. 17, Sling swivel bushing
A