Manual

Stock
17 GB 07.01
7.2 Stock setting options
7.2.1 Adjusting cheekpiece offset
Procedure:
1. Release screws Fig. 13/A (approx. four turns).
2. Slide cheekpiece to the left or to the right or
jam it as required.
3. Tighten the screws Fig. 13/A well.
.
7.2.2 Adjusting cheekpiece for height
1. Slacken off locking screws 531.
2. Set the desired height level with adjustment
nut 527.
3. Tighten the locking screws 531 well.
.
7.2.3 Adjusting the buttplate length
1. Unscrew screws 515.
2. Pull buttplate 516 back a little.
3. Press spacers 519 towards the left on the top
and turn them downwards for removal.
4. Extract the spacers to the bottom.
5. Tighten screws 515.
.
7.3 Installing the cheekpiece
Procedure:
1. Position the cheekpiece on the stock.
2. Adjust the cheekpiece for height (see section
7.2.2) and offset (see section 7.2.1).
3. Tighten the locking screws 531 well.
Abb. 13
Abb. 14
A A
531531 527
CAUTION!
Gun may be damaged
• Do not overtighten screws 515 as otherwise
the escutcheons will be torn out of the stock.
Abb. 15
519515519 516