Manual

Handling
11 GB 07.01
5.6 Unloading the gun
Procedure:
1. Lock the gun (see section 6.2).
2. Aim the gun at a stop-butt.
3. Remove the magazine (see section 5.8.1).
4. Unlock the gun (see section 6.1).
5. Open the bolt.
– The cartridge or cartridge case is pulled out
of the barrel chamber and ejected.
6. Check that the round has been ejected and
there are no more rounds in the barrel
chamber.
7. Empty magazine.
8. Pick up ejected round and clean the gun.
The gun is unloaded.
5.7 Bolt
5.7.1 Cocking the bolt
Before the bolt 100 can be inserted into the gun,
the firing pin must first be cocked.
A cocking indicator displays whether the bolt is
cocked or not (red = cocked).
Procedure:
1. Insert the tapered end of the supplied key into
the side opening of the lock 113.
2. Turn the lock towards the cocking wheel until it
engages.
WARNING!
Gun is ready to fire
May lead to death or severe injuries
• Never let the gun out of your hands before it
is unloaded.
• The gun is loaded, a round is located in the
chamber of the barrel.
• Never place your hand over the ejection port
of the bolt.
WARNING!
Gun has not been cleaned sufficiently
May lead to death or severe injuries and
damage to the gun
• The gun must be cleaned after every
shooting session (see section 12.2).
Abb. 3, Cocking the bolt
Abb. 4, Cocking indicator of the bolt (left: cocked, right decocked)