Manual

Handling
10GB07.01
Procedure:
1. Aim the gun at a safe target.
2. Unlock the gun (see section 6.1).
3. Place finger on trigger and pull back the trigger
to discharge the shot.
4. Keep the gun aimed at the target and repeat
and fire further shots as required.
5. If the magazine is empty, reload the gun (see
section 5.5).
6. Lock and unload (see section 5.6).
5.5 Reloading during shooting
Procedure:
1. Lock the gun (see section 6.2).
2. Remove the empty magazine (see section
5.8.1).
3. Unlock the gun (see section 6.1).
4. Open the bolt and pull it back to the stop.
5. Fill the magazine (see section 5.8.3).
6. Insert full magazine and check engagement
(see section 5.8.2).
7. Push the bolt forward and lock.
8. Lock the gun (see section 6.2).
The gun is loaded and ready to fire.
WARNING!
Gun is ready to fire
May lead to death or severe injuries
• If you decide to end the shooting session,
immediately unload the gun.
WARNING!
Insufficient awareness of the dangers
May lead to death or severe injuries
• Never let the gun out of your hands.
• Keep the gun pointed at the safe target.