Manual

Handling
9 GB 07.01
Procedure:
1. Lock the gun (see section 6.2).
2. Insert the bolt (see section 5.7.3).
3. Unlock the gun (see section 6.1).
4. Open the bolt and pull it back to the stop.
5. Fill the magazine (see section 5.8.3).
Note:
• If the full load capacity of the gun is to be used,
chamber a round and close the bolt prior to
inserting the magazine. Only now insert a full
magazine.
6. Insert the magazine (see section 5.8.2).
7. Push the bolt forward and lock.
8. Lock the gun (see section 6.2).
The gun is loaded and ready to fire.
5.4 Discharging a shot
WARNING!
Insufficient awareness of the dangers
May lead to death or severe injuries
• Ensure that the target and the environment
allow shots to be fired without danger.
• When discharging shots, ensure that your
hands or any other parts of the body are
located in front of, over or adjacent to the
barrel muzzle or the ejection port.
• Never allow other persons to stand beside
you where they might be struck by ejected
cartridge cases.
• Always wear ear protection and safety
glasses when shooting. Alert bystanders to
the importance of wearing ear protection.
• Immediately stop shooting and unload the
gun if you suspect that a round has not been
chambered properly, a case is jammed, a
bullet is lodged in the bore or a discharge
sounded or felt weak or abnormal.
• Never attempt to dislodge a blockage in the
barrel by firing another round.