Manual

Mounting telescopic isi-Mount
2007.03 GB
4. Turn the locking lever with the thumb
counterclockwise until the stop.
5. Fold down the locking lever frontwards (in
firing direction).
9.2 Removing telescopic sight
Procedure:
1. Lift out the locking lever of the mounting
surface towards the rear (opposite to firing
direction).
2. Turn the locking lever counter-clockwise to the
stop.
3. Tip the telescopic sight to the side upward from
the housing grooves.
9.3 Changing eye distance
1. Remove telescopic sight (see section 9.2).
2. The telescopic sight is to be set on the housing
so that the rear mounting top section is
congruent with the other of the two back
grooves.
3. Set on telescopic sight (see section 9.1).
For mounting other than is described here, the
J.P. Sauer & Sohn GmbH takes no guarantee for
function and shooting performance.
Fig. 25
CAUTION!
Gun may be damaged
• When taking off the telescopic sight, the hand
must always be placed on the telescopic sight
so that it is held after loosening the mounting
and does not fall.
Fig. 26
Fig. 27