Manual

Handling
1407.03 GB
5.9.2 Sights
Depending on the selected model, the SAUER
303 is supplied with various sight devices. In each
case the gun is shot in the factory with open sight
at 50 meters. A subsequent change of the sight
device is possible.
5.9.3 Height adjustment of the sight
Procedure:
1. Place the correct 1.5 mm WAF Allen key in the
screw on top of the front sight ramp before the
front sight (see Fig. 11).
• Turn the screw with click-stop clockwise: Front
sight moves higher, firing sits lower.
• Turn the screw with click-stop counter-
clockwise: Front sight moves lower, firing sits
higher.
5.9.4 Side adjustment of the sight
Procedure:
1. Place the correct Allen key in the front screw
on the front sight base.
2. Loosen screw and move the front sight to the
desired position.
3. Retighten screw.
Alternatively, the side adjustment can be also be
done on the rear sight (only with normal rear sight
slide, not with hunting track Battue) (see Fig. 12).
Procedure:
1. Loosen the slotted screw on the rear sight
ramp with the proper screwdriver
2. Move the rear sight to the side as desired.
3. Retighten screw (see Fig. 13).
Fig. 11
Fig. 12
Fig. 13