Manual

Handling
1007.03 GB
5.5 Reloading during shooting
Procedure:
1. Decock the gun (see section 6.2).
2. Remove or open the empty magazine
(see section 5.8.1/ 5.8.2).
3. Fill the magazine (see section 5.8.3).
4. Install or close full magazine and check the
catch (see section 5.8.1 / 5.8.2).
5. Close the slide.
The gun is loaded and ready to fire.
5.6 Unloading the gun
Procedure:
1. Decock the gun (see section 6.2).
2. Aim the gun at a stop-butt.
3. Remove or open the magazine
(see section 5.8.1/ 5.8.2).
4. Open slide (see section 5.7.1) and lock.
– The cartridge is pulled out of the barrel
chamber and ejected.
5. Check that the round has been ejected and
there are no more rounds in the barrel
chamber.
6. Empty magazine.
7. Pick up ejected round and clean the gun.
The gun is unloaded.
WARNING!
Insufficient awareness of the dangers
May lead to death or severe injuries
• Never let the gun out of your hands.
• Keep the gun pointed at the safe target.
WARNING!
Gun is ready to fire
May lead to death or severe injuries
• Never let the gun out of your hands before it
is unloaded.
• The gun is loaded, a round is located in the
chamber of the barrel.
• Never place your hand over the ejection port
of the bolt.
WARNING!
Gun has not been cleaned sufficiently
May lead to death or severe injuries and
damage to the gun
• The gun must be cleaned after every
shooting session (see section 11).