Manual

Care
29 06.01GB
6. Coat the barrel bore and the barrel chamber
with a little gun oil or gun grease.
7. Dry the barrel bore and the barrel chamber
from the back using a plastic coated cleaning
rod of the correct calibre.
11.3 External metal and wood surfaces
For the care and preservation of the external metal
and wood surfaces we recommend SAUER
Premium gun grease. Minute spherical Teflon
®
particles seal the pores of all wood and metal
surfaces and provide perfect protection and
optimal sliding characteristics.
Benefits:
• dry surfaces - dust etc. does not adhere;
• water and salt water proof;
• absolute corrosion protection;
• perfect sliding characteristics, reduced wear;
• resistant to sweaty palms;
• pressure resistant up to 57.000 kg/cm
2
;
• temperature resistant from -50 to +230 °C;
• perfect protection and care for steel and wood;
• neutral smell;
Procedure:
1. Thoroughly clean the gun using suitable cloths
and cleaning agents.
2. Thinly apply the grease with a cloth or sponge
over the whole gun (including the stock)
including all mechanical and moveable parts.
3. After a reaction time of at least 60 minutes
wipe dry and polish the gun with a clean cloth.
4. Dependent on the weather and frequency of
use the protective effect will last between two
to six months.
CAUTION!
Gun may be damaged
• Caring for the external metal surfaces is
particularly important in wet weather or if the
metal surfaces have come into contact with
sweaty body parts.
• Always wipe dry the gun prior to preservation.