Manual

Assembly
2406.01 GB
8.5 Inserting the magazine
see section 5.8.2.
8.6 Fitting the sling attachment
Corresponding figure, see Fig. 12.
Procedure:
1. Insert the bolt of the rear sling attachment into
the sling attachment bushing 407.
2. Press in the spring bolt.
3. Gently turn the sling attachment until the bolt
safety lock engages.
4. Insert the bolt of the front sling attachment into
the front sling attachment bushing 48.
Note:
• The sling attachment must be aligned exactly
90° to the orientation of the barrel.
• The bolts must protrude clearly above the
edge of the sling attachment body.
CAUTION!
Gun may be damaged
• An incompletely locked front stock can come
loose when shooting. It can also damage the
magazine tube.