Manual

Assembly
2206.01 GB
8 Assembly
8.1 Fitting the main stock
Corresponding figure, see Fig. 18.
Procedure:
1. Slide the main stock onto the gun.
2. Hand-tighten the main stock screw clockwise
with the long end of the special spanner
supplied (approx. 5 turns).
8.2 Fitting the barrel
Procedure:
1. Insert the barrel into the magazine tube such
that the block (S) at the bottom of the barrel
next to the groove (N) rests on the metal plate
of the magazine tube. Then press the barrel
against the metal plate and simultaneously
turn the groove until the barrel audibly rests on
the base of the magazine tube.
WARNING!
Gun is ready to fire
May lead to death or severe injuries
• There must be no magazine in the gun.
CAUTION!
Gun may be damaged
• Only assemble cleaned gun parts.
CAUTION!
Gun may be damaged
• Do not use force when inserting the barrel
into the magazine tube.
• Prior to fitting ensure that the internal
surfaces of the magazine tube and the
external surfaces of the barrel near the plug-
in attachment are free of foreign matter,
completely clean and absolutely dry.
Fig. 19
N
S